Measure pressure, temperature, and electrical signals with greater accuracy with Druck’s portable multifunction calibration tools.
Druck multifunction calibrators provide an all-in-one solution for your pressure measurement and generation needs. Our latest DPI 620 Genii multifunction process calibrator and HART /Foundation Fieldbus communicator features a modular design that enables expansion over time. With designs for both safe and hazardous area use, you can perform a wide variety of tasks from reading and sourcing voltage, current, frequency, and resistance signals, to documenting data and automating calibration procedures, equipping you to test and calibrate electrical equipment, pressure sensors, gauges, switches, thermocouples, RTDs, and more.
An advanced multi-function process calibrator and HART communicator for safe and hazardous area use.
Advanced pressure measurement & generation.
Greater stability. Higher accuracy.
Advanced calibration & asset management solution.
Make sure your Genii is up-to-date with the latest features! Here you can check the latest versions of the supporting files (firmware, documents and software)
DPI 620 Genii Multifunction Calibration System Components
Calibration System Overview
Druck DPI 620 Genii models are available for both safe and hazardous areas use and are comprised of four system components that provide a level of multi-functionality that formerly required a wide range of different instruments.
System components include the DPI620G calibrator and optional HART/Fieldbus Communicator, interchangeable pressure modules, module carrier, and pressure generation station.
Safe Area Models
- DPI620G - Multi-function calibrator, HART/Fieldbus Communicator
- PM620 - Interchangeable pressure modules
- PM620T - Interchangeable high-accuracy pressure modules
- MC620G - Pressure module carrier
- PV62XG - Pressure generating stations
Hazardous Areas Models
These models are ATEX and IECEx approved for hazardous area use.
- DPI620G-IS - Intrinsically Safe Multi-function calibrator and HART/Fieldbus Communicator
- PM620-IS - Intrinsically Safe Interchangeable pressure modules
- PM620T-IS - Intrinsically Safe Interchangeable high-accuracy pressure modules
- MC620-IS - Intrinsically Safe pressure module carrier
- PV62X-IS - Intrinsically Safe pressure generating stations
DPI620G - Multifunction Calibrator
This ultra-compact electrical, frequency and temperature calibrator with full HART communicator and optional Foundation Fieldbus communicator provides simultaneous measurement and source capabilities for the setup, testing, and calibration of most types of process instruments including transmitters, transducers, gauges/indicators, switches, proximity detectors, counters, RTDs, thermocouples and valve positioners. Features include:
- High-resolution touch display and UI (user interface) supporting gestures and swipes for a flatter menu structure and greater ease of use
- HART and Foundation Fieldbus digital communication with complete device description libraries, internal modems, and free of charge upgrades
- ATEX and IECEx approved system for use in zone 1 and 2 classified hazardous areas
- UI DASHBOARD to quickly launch applications such as CALIBRATOR, HART, and Foundation Fieldbus
- TASK menu allows single touch configuration for common devices such as pressure and temperature transmitters, transducers, switches, and valve positioners. Most used and user-configured tasks can be added to FAVOURITES.
- All first-generation DPI620 and the new Genii system components are fully interchangeable, e.g. pressure stations, pressure modules, and all accessories
Note - the DPI620G also comes in a hazardous environment model, the intrinsically safe (IS) DPI620G-IS
PM620 - Interchangeable Pressure Modules
The PM 620 is the latest development in digital output sensor technology incorporating a number of key innovations to allow pressure re-ranging of compatible equipment. A simple screw fit makes both the pressure and electrical connections without the need for tools, sealing tape, cables, or plugs and digital characterization allows interchangeability without set-up or calibration. The PM 620 is also available in an intrinsically safe version, the PM 620-IS, for use in hazardous environments. Features include:
- Fully interchangeable with no need for set-up or calibration
- Simple screw fit - hand tight no tools required
- Ranges from 25 mbar to 1,000 bar (10 inH2 O to 15,000 psi)
- Accuracy from 0.005% FS • Safe and Hazardous area Versions available
- Pressure ranges from -14.5 to 15,000 psi
- Gauge or absolute pressures
- IS model is ATEX and IEC approved Intrinsically Safe
PM620T - Interchangeable High-Accuracy Pressure Modules
PM620 now incorporates our unique range of TERPS resonant silicon pressure sensor technology, the PM620T and the PM620TS intrinsically safe version. Providing up to four times greater stability and higher accuracy than current pressure measurement technologies. Features include:
- Total uncertainty from 0.0125% FS
- Temperature-compensated accuracy from -10°C to 50°C (-14°F to 122°F)
- Simple screw fit - hand tight no tools required
- Ranges from 1.2 bar to 100 bar (17.5 psi to 1500 psi)
- Compatibility with pressure calibrators such as DPI612 and DPI620G/DPI620G-IS series
- Fully interchangeable with no need for set-up or calibration
MC620G - Pressure Module Carrier
The MC620 module carrier attaches to the head of the DPI620 to provide two independent pressure measurement channels. These can be fitted with any PM620 pressure module from 25 mbar to 1,000 bar (10 inH2 O to 15,000 psi). A simple screw fit means no tools are required and ensures both a high integrity pressure seal and a reliable digital interface. Even the pressure adapters are interchangeable and only require a finger tight fit. The carrier is designed for pressure safety and will automatically seal if a module is not fitted or if the user attempts to remove it. Features include:
- 2 independent pressure channels
- Simple to re-range
- Pressure protection
- Safe and Hazardous (IS) versions available
PV62XG - Pressure Generation Stations
We offer three pressure generation stations, each of which are available in safe and hazardous environment configurations:
- The PV621, a pneumatic pressure generator for pressures 95% vacuum to 20 bar (300 psi)
- The PV622, a pneumatic pressure generator for pressures 95% vacuum to 100 bar (1,500 psi)
- The PV623, a hydraulic pressure generator for pressures up to 1,000 bar (15,000 psi)
Each pressure station is designed for stand-alone operation as a pressure generator and can replace conventional hand pumps to provide greater efficiency and ease of use. They can also be used on the workbench as comparators. Combining any of the pressure stations with a PM620 pressure module and the DPI620 calibrator creates a uniquely capable, self-contained pressure calibrator.
DPI620 - Accessories
IO620-AC - Replacement AC voltage measurement probe Attaches to the DPI620G, 30 V sockets to provide 300 VAC true rms measurement. Is supplied as standard with all new DPI620G
IO620-CASE-1 - Carrying case Protective carrying case with belt loop, shoulder strap and large detachable pocket for test leads and accessories
IO620-CASE-2 - System carrying case Protective carrying case for system components including the DPI620G, MC620G, PM620 modules, test leads, hose and adaptors
IO620-CHARGER - Battery charging station External battery charging station allows a spare battery to be charged independently of the DPI620G for minimum instrument downtime. Power is provided by the standard mains adaptor (P/N I0620-PSU). A complete charge cycle takes approximately 6.5 hours. The charging station can be connected to a USB port to provide a top-up charge (full charge in 13 hours)
IO620-USB-PC - USB cable Connects the DPI620G or DPI620G-IS to a PC
IO620-IDOS-USB - IDOS to USB converter Allows connection of an IDOS universal pressure module to the DPI620G. P/N IO620-USB-PC is also required to connect the converter to the DPI620G USB port. (not compatible with DPI620G-IS)
IO620-USB-RS232 - USB to RS 232 cable Connects the DPI620G to an RS 232 interface (not compatible with DPI620G-IS)
DPI620G - Certifications
Are you ready for the world's most accurate portable calibrator? Druck's TERPS PM provides ultimate accuracy and stability in pressure calibration to create the world's most accurate portable calibration system.
Easy-to-use with 3 Tools in 1: calibrator, test meter and Hart/Foundation Fieldbus communicator. Best in class accuracy for pressure, electrical, temperature and frequency calibration. Automates procedures, documents results and integrates with calibration management software such as Druck's 4Sight2.
Consider Druck's 4Sight2 Calibration Management Software as part of a hardware and software calibration management solution we call "Calibration Unified." 4Sight2 offers up to 50 percent improvement in asset productivity to simplify, automate and document your calibration process.
Contact a Druck Calibration Specialist
Need to upgrade your legacy Druck equipment?
|Legacy Model Number||End of Service & Repair Support||Calibration Support||Recommended Replacement|
|DPI320/325||2013||Calibration currently supported||DPI620G or PM620 or PV622G (Pneumatic)|
|DPI330/335||2013||Calibration currently supported||DPI620G or PM620 or PV623G|
|MCX (All models) / TRX (All models, including T460)||No service or repair available||Calibration currently supported||DPI620G (Genii) or DPI880|
|DPI620/620-CE||2018||Calibration currently supported||DPI620G (Genii)|
|DPI620IS & DPI620IS-CE||2019||Calibration currently supported||DPI620G-IS Series (Genii)|
|HTP1||No service or repair available||No calibration support available||PV212-22 or PV212-23|
|PRV12-HTP1||No service or repair available||No calibration support available||PRV212-1, PRV212-2, PRV212-3, PRV212-4, or PRV212-5|
|PRV12-PV212||No service or repair available||No calibration support available||PRV212-1, PRV212-2, PRV212-3, PRV212-4, or PRV212-5|
|1S-01-0657||No service or repair available||No calibration support available||PV212A121M2038-1|
|1S-01-0942||No service or repair available||No calibration support available||PV212A121M2038-2|
|1S-01-0671||No service or repair available||No calibration support available||PV212A121M2038-3|
|1S-01-0886-NEW||No service or repair available||No calibration support available||PV212A121M2038-4|
|1S-01-0736||No service or repair available||No calibration support available||PV212A121M2038-5|
|201-978||No service or repair available||No calibration support available||PV212A121M2038-6|
|PV212-700||No service or repair available||No calibration support available||PV212-22-P|
|PV212-22-0||No service or repair available||No calibration support available||PV212-22-P|
|PV212||No service or repair available||No calibration support available||PV212-23-P|
|PV212-25-0||No service or repair available||No calibration support available||PV212-23-P|
|PV212-HP-700||No service or repair available||No calibration support available||PV212-22-TK-B|
|PV212-22-0HA||No service or repair available||No calibration support available||PV212-22-TK-N|
|PV212-HP||No service or repair available||No calibration support available||PV212-23-TK-B|
|PV212-25-0HA||No service or repair available||No calibration support available||PV212-23-TK-N|
|PV212-DPI104||No service or repair available||No calibration support available||PV212-22-104-B or PV212-22-104-N|
|PV212-DPI104-HP||No service or repair available||No calibration support available||PV212-23-104-B or PV212-23-104-N|
|PV212-DPI104S||No service or repair available||No calibration support available||PV212-22-104S-B or PV212-22-104S-N|
|PV212-DPI104S-HP||No service or repair available||No calibration support available||PV212-23-104S-B or PV212-23-104S-N|
|1S-HTP1-700-OEM||Contact Druck for unit assessment||No calibration support available||PV212-22-P|
|1S-HTP1-700-OEM-US||Contact Druck for unit assessment||No calibration support available||PV212-22-P|
|1S-HTP1-1000-OEM||Contact Druck for unit assessment||No calibration support available||PV212-23-P|
|1S-HTP1-1K-OEM-US||Contact Druck for unit assessment||No calibration support available||PV212-23-P|
|1S-HTP1-700||Contact Druck for unit assessment||No calibration support available||PV212-22-TK-B|
|1S-HTP1-1000||Contact Druck for unit assessment||No calibration support available||PV212-23-TK-B|